Codes of Safe Practices

ELECTRICAL CORDS

1. Never splice or patch electrical cords. Cords should be replaced or shorten by qualified electricians.

2. When you disconnect electrical equipment, pull the plug rather than the cord.

3. Keep extension cords off the floor as much as possible. If it is absolutely necessary to put such cords on the floor, use approved temporary floor covers to prevent tripping on or damage to the cord.

4. Remove frayed or damaged electrical cords immediately.

5. If portable electrical tools are not double-insulated and labeled as such, make sure they are equipped with a 3-wire plug. You may not cut off the ground connection.

6. If the ground prong has been removed, do not use the equipment or tool until the plug has been replaced.